I made a circuit that activates on a long signal but I am missing one that activates on a short pulse and does not activate if the pulse time exceeds a certain pulse. Everything I made still activates on a longer pulse which is a problem as I only want one output in a one input system (see below for more details). I would like to have this as an adjustable circuit (minimum/maximum pulse length).
System details:
- 1 input
- 2 outputs
- Longer signal will output a certain signal (x) - this has been made
- Shorter signal will output a certain signal (y) - this is the problem
- Longer signal will not output the signal (y) - this is the problem as it currently does
Current system (very basic)
1 Answer
so i build a little crude thing that works, it needs improvement, but it will give the idea
section A is a timer, it counts how long of a pulse is allowed
section B is a falling edge mono-stable circuit
the 32 items in the hopper is so a stone button gets through, but a wooden one doesn't
so when the pulse from the input (between the buttons) and it ends after the clock, it will get cut off
but if its shorter then the clock, it will pass through the comparator facing the piston
note: this is the falling edge mono-stable circuit I used
hopefully I helped!
1
