I need to know the number of rows in a table to calculate a percentage. If the total count is greater than some predefined constant, I will use the constant value. Otherwise, I will use the actual number of rows.
I can use SELECT count(*) FROM table. But if my constant value is 500,000 and I have 5,000,000,000 rows in my table, counting all rows will waste a lot of time.
Is it possible to stop counting as soon as my constant value is surpassed?
I need the exact number of rows only as long as it's below the given limit. Otherwise, if the count is above the limit, I use the limit value instead and want the answer as fast as possible.
Something like this:
SELECT text,count(*), percentual_calculus()
FROM token
GROUP BY text
ORDER BY count DESC;7 Answers
Counting rows in big tables is known to be slow in PostgreSQL. The MVCC model requires a full count of live rows for a precise number. There are workarounds to speed this up dramatically if the count does not have to be exact like it seems to be in your case.
(Remember that even an "exact" count is potentially dead on arrival under concurrent write load.)
Exact count
Slow for big tables.
With concurrent write operations, it may be outdated the moment you get it.
SELECT count(*) AS exact_count FROM myschema.mytable;Estimate
Extremely fast:
SELECT reltuples AS estimate FROM pg_class where relname = 'mytable';Typically, the estimate is very close. How close, depends on whether ANALYZE or VACUUM are run enough - where "enough" is defined by the level of write activity to your table.
Safer estimate
The above ignores the possibility of multiple tables with the same name in one database - in different schemas. To account for that:
SELECT c.reltuples::bigint AS estimate
FROM pg_class c
JOIN pg_namespace n ON n.oid = c.relnamespace
WHERE c.relname = 'mytable'
AND n.nspname = 'myschema';The cast to bigint formats the real number nicely, especially for big counts.
Better estimate
SELECT reltuples::bigint AS estimate
FROM pg_class
WHERE oid = 'myschema.mytable'::regclass;Faster, simpler, safer, more elegant. See the manual on Object Identifier Types.
Replace 'myschema.mytable'::regclass with to_regclass('myschema.mytable') in Postgres 9.4+ to get nothing instead of an exception for invalid table names. See:
Better estimate yet (for very little added cost)
We can do what the Postgres planner does. Quoting the Row Estimation Examples in the manual:
These numbers are current as of the last
VACUUMorANALYZEon the table. The planner then fetches the actual current number of pages in the table (this is a cheap operation, not requiring a table scan). If that is different fromrelpagesthenreltuplesis scaled accordingly to arrive at a current number-of-rows estimate.
Postgres uses estimate_rel_size defined in src/backend/utils/adt/plancat.c, which also covers the corner case of no data in pg_class because the relation was never vacuumed. We can do something similar in SQL:
Minimal form
SELECT (reltuples / relpages * (pg_relation_size(oid) / 8192))::bigint
FROM pg_class
WHERE oid = 'mytable'::regclass; -- your table hereSafe and explicit
SELECT (CASE WHEN c.reltuples < 0 THEN NULL -- never vacuumed WHEN c.relpages = 0 THEN float8 '0' -- empty table ELSE c.reltuples / c.relpages END * (pg_catalog.pg_relation_size(c.oid) / pg_catalog.current_setting('block_size')::int) )::bigint
FROM pg_catalog.pg_class c
WHERE c.oid = 'myschema.mytable'::regclass; -- schema-qualified table hereDoesn't break with empty tables and tables that have never seen VACUUM or ANALYZE. The manual on pg_class:
If the table has never yet been vacuumed or analyzed,
reltuplescontains-1indicating that the row count is unknown.
If this query returns NULL, run ANALYZE or VACUUM for the table and repeat. (Alternatively, you could estimate row width based on column types like Postgres does, but that's tedious and error-prone.)
If this query returns 0, the table seems to be empty. But I would ANALYZE to make sure. (And maybe check your autovacuum settings.)
Typically, block_size is 8192. current_setting('block_size')::int covers rare exceptions.
Table and schema qualifications make it immune to any search_path and scope.
Either way, the query consistently takes < 0.1 ms for me.
More Web resources:
- The Postgres Wiki FAQ
- The Postgres wiki pages for count estimates and count(*) performance
TABLESAMPLE SYSTEM (n) in Postgres 9.5+
SELECT 100 * count(*) AS estimate FROM mytable TABLESAMPLE SYSTEM (1);Like @a_horse commented, the added clause for the SELECT command can be useful if statistics in pg_class are not current enough for some reason. For example:
- No
autovacuumrunning. - Immediately after a large
INSERT/UPDATE/DELETE. TEMPORARYtables (which are not covered byautovacuum).
This only looks at a random n % (1 in the example) selection of blocks and counts rows in it. A bigger sample increases the cost and reduces the error, your pick. Accuracy depends on more factors:
- Distribution of row size. If a given block happens to hold wider than usual rows, the count is lower than usual etc.
- Dead tuples or a
FILLFACTORoccupy space per block. If unevenly distributed across the table, the estimate may be off. - General rounding errors.
Typically, the estimate from pg_class will be faster and more accurate.
Answer to actual question
First, I need to know the number of rows in that table, if the total count is greater than some predefined constant,
And whether it ...
... is possible at the moment the count pass my constant value, it will stop the counting (and not wait to finish the counting to inform the row count is greater).
Yes. You can use a subquery with LIMIT:
SELECT count(*) FROM (SELECT 1 FROM token LIMIT 500000) t;Postgres actually stops counting beyond the given limit, you get an exact and current count for up to n rows (500000 in the example), and n otherwise. Not nearly as fast as the estimate in pg_class, though.
I did this once in a postgres app by running:
EXPLAIN SELECT * FROM foo;Then examining the output with a regex, or similar logic. For a simple SELECT *, the first line of output should look something like this:
Seq Scan on uids (cost=0.00..1.21 rows=8 width=75)You can use the rows=(\d+) value as a rough estimate of the number of rows that would be returned, then only do the actual SELECT COUNT(*) if the estimate is, say, less than 1.5x your threshold (or whatever number you deem makes sense for your application).
Depending on the complexity of your query, this number may become less and less accurate. In fact, in my application, as we added joins and complex conditions, it became so inaccurate it was completely worthless, even to know how within a power of 100 how many rows we'd have returned, so we had to abandon that strategy.
But if your query is simple enough that Pg can predict within some reasonable margin of error how many rows it will return, it may work for you.
Reference taken from this Blog.
You can use below to query to find row count.
Using pg_class:
SELECT reltuples::bigint AS EstimatedCount FROM pg_class WHERE oid = 'public.TableName'::regclass;Using pg_stat_user_tables:
SELECT schemaname ,relname ,n_live_tup AS EstimatedCount
FROM pg_stat_user_tables
ORDER BY n_live_tup DESC;How wide is the text column?
With a GROUP BY there's not much you can do to avoid a data scan (at least an index scan).
I'd recommend:
If possible, changing the schema to remove duplication of text data. This way the count will happen on a narrow foreign key field in the 'many' table.
Alternatively, creating a generated column with a HASH of the text, then GROUP BY the hash column. Again, this is to decrease the workload (scan through a narrow column index)
Edit:
Your original question did not quite match your edit. I'm not sure if you're aware that the COUNT, when used with a GROUP BY, will return the count of items per group and not the count of items in the entire table.
You can also just SELECT MAX(id) FROM <table_name>; change id to whatever the PK of the table is
In Oracle, you could use rownum to limit the number of rows returned. I am guessing similar construct exists in other SQLs as well. So, for the example you gave, you could limit the number of rows returned to 500001 and apply a count(*) then:
SELECT (case when cnt > 500000 then 500000 else cnt end) myCnt
FROM (SELECT count(*) cnt FROM table WHERE rownum<=500001)For SQL Server (2005 or above) a quick and reliable method is:
SELECT SUM (row_count)
FROM sys.dm_db_partition_stats
WHERE object_id=OBJECT_ID('MyTableName')
AND (index_id=0 or index_id=1);Details about sys.dm_db_partition_stats are explained in MSDN
The query adds rows from all parts of a (possibly) partitioned table.
index_id=0 is an unordered table (Heap) and index_id=1 is an ordered table (clustered index)
Even faster (but unreliable) methods are detailed here.
